1. What is Leather Laminate Or High lighter Laminate ?
Ans. :: Leather Laminate Or High lighter laminate are the newly introduced concept of using artificial leather into the making of laminates. Generally normal laminates are made of Design paper & craft paper but these laminates are made of Craft paper and synthetic leather giving the new look to the traditional laminates. These laminates are used to highlight the design of the interior concepts.
2. Which places are Suitable for application of Leather Laminates ?
Ans. :: Leather Laminates can be applied in any interior concept application like Wardrobe, Bed, TV Unit, Counters, Wall Panels, Partition, Ceilings and many more . It is advised to cover the laminate with glass on horizontal application like table top, Counter Top etc. Exterior application is not recommended due to direct sun rays.
3. How to Cut the Leather Laminates ?
Ans. :: Generally Leather Laminates is cut from the back side ( From craft paper side ). After Cutting the Craft paper, It should be cut with fine Scissor or paper cutter.
4. Which Adhesive should be used for Leather Laminate ?
Ans. :: Normal SH or SR adhesive( P.V.A. Or White glue) can be used to apply the Leather Laminate. No Special Adhesive Required for Pasting the Leather Laminates.
5. Handling of Leather Laminates during the process ?
Ans. :: The improper handling of laminates can be damaged the laminates. Especially the edges should be covered or precautions should be taken to bend or turn the Leather Laminates in 90 degrees to avoid the exposure of edges.
6. Is it Washable?
Ans. :: Yes. It is washable. You can clean the Leather Laminates with wet cloth. Even fur and fabric laminates can be clean with normal water with little wet cloth. Do not Use any strong Chemical or Detergent to clean it. Do not Use Brush or Scotch Bite to clean the laminate. Note: the cloth must be fresh or new to use.
7. What will be the thickness of the Leather Laminates ?
Ans. :: The Thickness of the Leather Laminates will be very from 1.3 mm to 2 mm depends on the design and pattern of laminates. It is advised to inspect the sample before application.